Seccua UrSpring, Installation And User Instructions Manual

Page: 11 / 108

2.3.4 Filter life left
Shows the estimated percentage of the filter-life left, before the filter needs to be replaced.
2.3.5 Current pressure difference
NOTICE This function is not available with UrSpring Home devices.
This shows the current pressure difference between the feed water and filtered water.
To show the pressure difference:
1. Select the menu ​ Operating Data? > ​ Filter State .
2. Use and to display ​ Diff. Pressure and select it with .
The display shows the pressure diff ff erence.
NOTICE The maximum pressure difference may not exceed 2.5 bar (36.26 psi).
A filter should reduce the pressure as little as possible. Therefore a high pressure difference is
an indication that the filter is fouled (or the current water consumption exceeds the UrSpring
capacity) and should be flushed (see
​ Flushing the filter module ​ ). If flushing does not reduce the
pressure difference sufficiently, the filter should be changed (see ​ Place a new filter ​ ).
2.4 Configuring the controller
The controller can be configured in the settings menu.
To select a menu item use the and buttons on the controller. Select the menu item with
the button.
Recommended settings
Type of water Recommended settings
City water ● Set automatic daily cleaning. See Daily flush ​ .
● Set the flush length to 5 sec. See 2.4.7 Set the flush length ​ .
● Select to delay flushing during water usage. See 2.4.8 Select
to stop flush during water use ​ .
Well water or City
Water, which might
show brown water
from time to time. ● Set automatic daily cleaning. See Daily flush ​ .
● Select automatic flushing when the filter is fo ff uled. See
Automatic flush when fouled ​ .
● Set the flush length to 10 sec. See 2.4.7 Set the flush length ​ .
● Select to delay flushing during water usage. See 2.4.8 Select
to stop flush during water use ​ .
Page 11/50