If the controller is PC connection, the users ID can be shown in the software.
a), Card user, its ID is the same as the card ID number;
b) Fingerprint user, its ID is the combination of device ID and fingerprint ID
The device ID is set as below:
* manager password # 3 device ID
＃
*
Note: Device ID can be any digit of 0-255
For example: device ID was set 255, fingerprint ID is 3, then its ID to the controller is 255
00003.
2, F007-EM works as Controller, connecting slave reader
F007-EM supports wiegand input, any card reader which support wiegand 26 interface can
connect to it as its slave reader, no matter it is ID card or IC card. The connection is showed as
Finger 2. when add cards, it is required to do it at the slave reader, but not controller( except EM
card reader, which can be added on either reader or controller)
Summary of Contents for F007-EM
Page 12: ......
