Sebury F007-EM, User Manual

Page: 8 / 12

b) If the door was opened force, or the door was not opened in 20 seconds after lock was
released, the inside Buzzer and outside Siren will both alarm.
7. Setting - Security Status
* manager password #
Normal status:
7 0 #
* (Factory default setting)
Lock on status:
7 1 #
*In 10 minutes, if there
’
s 10 times invalid card or wrong
Password, the device will lock on for 10 minutes.
Alarm status:
7 2 #
*In 10 minutes, if there
’
s 10 times invalid card or wrong
Password, the device will alarm.
8 Remove Alarm
When the device is in alarm ( from built-in buzzer, alarm equipment outside), to remove it:
Read valid user’s card or fingerprint or Manager Fingerprint or card or Manager Password -
# (Any of the method above can remove the alarm.)
9 Two devices interlock setting
* manager password #
8 0 #
* to disable this function (factory default setting)
8 1 #
* to enable this function
10 Setting Alarm signal output time
* manager password #
9 0～3 #
*
Alarm time is 0-3 minutes for option, factory default setting 1 minute.
5, User Operation
User to release the door
Card user:
Read card
Fingerprint user:
Input Fingerprint
6, Sound and Light indication
Operation Status LED Finger Sensor Buzzer
Reset to factory default
setting Orange - Two short ring
Sleeping mode Red shines slow - -
Stand by Red shines slow Shine -
Enter into programming mode Red shines - Short Ring
Exit from programming mode Red shines slow - Short Ring
Wrong operation - - Three short ring
Open the door Green shines - Short Ring
Alarm Red shines fast - Alarm
7, Technical sheet