Seat New Leon Cupra 2008, Technical Manual, Page: 15 / 70

2008 SEAT Sport UK, Technical Manual – New Leon Cupra v3 (Autosport International)
14
4 General Technical Requirements: (5.4)
Fixings (5.4.5)
Fixings specification must remain as those supplied by SEAT Sport UK.
Heat Insulation (5.4.7)
Heat insulation specification must remain as those supplied by SEAT Sport UK.
SEAT Sport UK Base Set Up for the New Leon Cupra Race Car
At the point of collection all cars will have the following base set up:
Toe
Front Toe: 15’ out each wheel
Rear Toe: 15’ out each wheel
Camber
Front Camber: -3.5 ˚
Rear Camber: -3.0 ˚
Roll Bars
Front Roll bar: Middle Position
Rear Roll bar: Middle Position
Dampers
Front compression: Centre Position
Rear compression: Centre Position
Front Rebound: Centre Position
Rear Rebound: Centre Position
Springs
Front: 160/60/90 main 60/60/2 helper
Rear: 160/60/60 main 60/60/2 helper
Rear Wing
Rear Wing Position: B2 = 0 ˚
Brake Bias
Front/Rear Brake Bias: 50/50 %