Seat 2014 LEON CUP RACER, Owner'S Manual

Page: 98 / 284

Operation
Note
In cold or damp weather conditions, the
headlights, tail lights and turn signals may
mist up inside temporarily. This is normal and
in no way effects the useful life of the vehicle
lighting system.
Automatic dipped beam control

The automatic dipped beam control is merely
intended as an aid and is not able to recog-
nise all driving situations.
When the light switch is in position

, the
vehicle lights and the instrument panel and
switch lighting switch on and off automatical-
ly in the following situations
›››
in Daytime
driving light on page 95 :
Automatic switching
on Automatic switching
off
The photo sensor detects
darkness, for example,
when driving through a
tunnel. When adequate lighting is
detected.
The rain sensor detects
rain and activates the
windscreen wipers. When the windscreen wip-
ers have been inactive for
a few minutes.
WARNING
If the road is not well lit and other road users
cannot see the vehicle well enough or at all,
accidents may occur.
● The automatic dipped beam control (

)
only switches on the dipped beam when
there are no changes in brightness, and not,
for example when it is foggy.
Main beam assist*
Main beam assist (Light Assist)
The main beam assist operates, within the
limits of the system and depending on the
environmental and traffic conditions, as of a
speed of 60 km/h (37 mph) when it switches
on automatically, and is then deactivated
again below 30 km/h (18 mph)
›››
. This is
managed via a camera situated on the base
of the interior mirror.
The main beam assist generally detects illu-
minated areas and deactivates the main
beam when passing through a town, for ex-
ample.
Switching the main beam assist on and off
Func-
tion Action
Acti-
vate:

– Switch the ignition on and turn the light
switch to position

.
– From the base position, move the main
beam and turn signal lever forwards
›››
page 95 . When the warning lamp

is dis-
played on the instrument panel display, the
main beam assist is switched on.
To
switch
system
off:
– Switch off the ignition.
–
OR: turn the light switch to a different posi-
tion to

›››
page 94 .
– OR: with main beam on, move the main
beam and turn signal lever backwards.
–
OR: move the main beam and turn the sig-
nal lever forwards to manually switch the
main beam on. The main beam assist will then
be deactivated.
Malfunctions
The following conditions may prevent the
main beam headlight control from turning off
the headlights in time or from turning off al-
together:
●
In poorly lit towns with highly reflective
signs.
●
Other insufficiently lit road users (such as
pedestrians or cyclists).
●
On tight bends and steep slopes (bumps)
and when oncoming vehicles are partially ob-
scured.
96