background image

Operation

Seat heating

Fig. 107 

In the centre console: front seats

heating switch

The seat cushions can be heated electrically
when the ignition is switched on. The back-
rest is also heated in some versions.

The seat heating should not be engaged in
any of the following conditions:

The seat is unoccupied.

The seat has a covering.

There is a child seat installed in the seat.

The seat cushion is wet or damp.

The indoor or outdoor temperature is great-

er than 25°C (77°F).

Activate

Press the button 

 or 

. Seat heating is

switched on fully.

Adjusting the heating output

Press the button 

 or 

 repeatedly until the

desired intensity level is reached.

Deactivating

Press the button 

 or 

 until all warning

lamps switch off.

WARNING

People who, because of medications, paraly-
sis or chronic diseases (e.g. diabetes) cannot
perceive pain or temperature, or have a limi-
ted perception thereof, may suffer burns to
the back, buttocks or legs when using seat
heating, an occurrence that may entail a very
lengthy recovery period or from which it may
not be possible to recover fully. Seek medical
advice if you have doubts regarding your
health.

People with limited pain and temperature

thresholds must never use seat heating.

WARNING

If the fabric of the cushion is wet, this can ad-
versely affect the operation of the seat heat-
ing, increasing the risk of burns.

Make sure the seat cushion is dry prior to

using the seat heater.

Do not sit on the seat with clothing that is

wet or damp.

Do not leave clothing that is wet or damp

on the seat.

Do not spill liquid on the seat.

CAUTION

To avoid damaging the heating elements of

the seat heaters, please do not kneel on the
seat or apply sharp pressure to a single point
on the seat cushion or backrest.

Liquids, sharps objects and insulating ma-

terials (e.g. covers or child seats) can damage
the seat heating.

In the event of smells, switch off the seat

heating immediately and have it inspected by
a specialised workshop.

For the sake of the environment

The seat heating should remain on only when
needed. Otherwise, it is an unnecessary fuel
waste.

Front centre armrest

The centre armrest can be adjusted to various
levels.

Adjusting the centre armrest

To adjust the tilt, lift the armrest from the
starting position so that it is engaged.

To return the armrest to the starting posi-
tion, remove the armrest from the upper
fixed position and lower it.

108

Summary of Contents for 2014 LEON CUP RACER





























































































































































































































































































Reviews: