36
Sealite Buoy Warranty V2.2
Activating the Warranty
Upon purchase, the Sealite Pty Ltd warranty must be activated for recognition of future
claims. To do this you need to register on-line. Please complete the Online Registration
Form at:
www.sealite.com
Sealite Pty Ltd will repair or replace your buoy product in the event of failure for a period of
up to twelve months (small buoy products less than 1500mm diameter) & a period of up to
five years (large buoy products 1500mm diameter & larger) from the date of purchase.
The unit must be returned to Sealite freight prepaid.
Warranty Terms
1. Sealite Pty Ltd warrants that any rotationally-moulded buoy products (“Buoy Products”)
will be free from defective materials and workmanship under normal and intended use,
subject to the conditions hereinafter set forth, for a period of twelve (12) months for
small buoy products up to under 1500mm diameter, and for a period of five (5) years for
large buoy products including and over 1500mm in diameter from the date of purchase
by the original purchaser.
2. Sealite Pty Ltd will repair or replace, at Sealite’s sole discretion, any Buoy Products found
to be defective in material and workmanship in the relevant warranty period so long as
the Warranty Conditions (set out below) are satisfied.
Warranty Conditions
This Warranty is subject to the following conditions and limitations;
1. The warranty is applicable to buoys manufactured from 1/1/2009.
2. The warranty is void and inapplicable if:
a. the product has been used or handled other than in accordance with the
instructions in the owner’s manual and any other information or instructions
provided to the customer by Sealite;
b. the product has been deliberately abused, or misused, damaged by accident or
neglect or in being transported; or
c. the defect is due to the product being repaired or tampered with by anyone other
than Sealite or authorised Sealite repair personnel.
3. The customer must give Sealite Pty Ltd notice of any defect with the product within 30
days of the customer becoming aware of the defect.
4. No modifications to the original specifications determined by Sealite shall be made
without written approval of Sealite Pty Ltd.
Summary of Contents for ATLANTIC-3000
