step 1
insert and slide front base bracket (e1) and back base
bracket (f1) into the bottom of left side panel (B1) and
right side panel (B2) as per diagram above. Attach
brackets using a self tapping screw (J) in each of
the four corners as shown in the diagram (fig.1).
step 2
stand unit upright and install the left back panel (c1)
followed by the right back panel (c2). fix the back
panels with self tapping screws (J) as per the diagram
(fig.2). At this stage, fix all screws except those marked
with a cross. You will need an extra pair of hands to
assist from the opposite side while you fix the screws.
step 3.
insert the middle column (G1) into the hole in the front base bracket (e1). fix it using a self tapping screw (J) from the back. install
the top panel (A1) and fix it using self tapping screws (J) as per the diagram (fig4). Install shelf supports (I) in the middle column
(G1) and in all four corners level for each designated height and then insert the shelves (d1).
Gsc110385.V2 | issue 1 24/10/16
Original Language Version
© Jack sealey limited
fig.1
fig.2
fig.3
