Section 3. Operation
SLCT-FAL5645 Sealing Machine
© Sealed Air Corporation (US)
MM-0110; Revision 1-A: 11/01/2013
3-3
3.1
CONTROL PANEL
Figure 3–1 Control Panel
Call
out
Description
1
Main Circuit Breaker Switch turns ON/OFF the power input
2
Resets the machine (Flashes Blue light until pushed)
3
Starts the conveyor
4
Stops the conveyor
5
Cycles the sealing/cutting process once
6
Manually runs the fi lm feed motor until the button is released
7
Emergency stops the machine. Must be released to restart machine.
8
Not Used
9
Sets the temperature of the Front sealing blade
10
Selects Horizontal Sensor mode for rectangular or square products
11
Sets the temperature of the Side sealing blade
12
Sensor mode to control the packing process
13
Sets the conveyor run time for length of fi lm at the back of the product
14
Switches ON/OFF the heater for the sealing blades
15
Sets the sealing/cutting dwell time
16
Sets the conveyor run time for fi lm length at the front of the product
17
Power ON light (Green)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
