Section 1. General Information
SLCT-FAL5645 Sealing Machine
© Sealed Air Corporation (US)
MM-0110; Revision 1-A: 011/01/2013
1-6
Moving parts can crush. Do not remove any protective guards and keep extremities clear of
moving parts at all times when this safety label is present. Turn off and lock out system power
before servicing equipment or when following instructions labeled with this symbol.
1.1.2.10 Safety Glove Pictogram
This symbol is used to signify the presence of a possible hand hazard injury as
a result of working on or around the equipment. In conjunction with safe work
practices, Personal Protective Equipment (PPE) is required when this label is
present. Wear the most appropriate type of safety glove for protection against
cuts, scrapes, punctures, and lacerations when this label is present.
Safety glove selection should be based on the gloves performance
characteristics relative to the specifi c task(s) to be performed, conditions
present, duration of use, and the actual and potential hazards identifi ed.
1.1.2.11 Safety Eye Wear Pictogram
This symbol is used to signify the presence of a possible eye injury hazard as
a result of working on or around the equipment. In conjunction with safe work
practices, Personal Protective Equipment (PPE) is required when this label is
present.
Personal protective eye equipment must meet certain design criteria to be
used as safety equipment and must be worn when workers are at risk from
fl ying particles, liquid/caustic/ acid chemicals or vapors, or operations that
may emit light.
1.1.2.12 Machine Guard Pictogram
This symbol is used to signify the presence of a hazard to personnel working
on or around the equipment when a machine guard(s) is not in place.
Do NOT operate this equipment when guards are missing or open. Serious
injury could occur!
1.1.2.13 Machine Handling Pictogram
This symbol is used to signify the need for a certifi ed forklift operator and
is also used to indicate the correct forklift tine placement when lifting the
machine.
