Section 2. General Information
SLCT-FAL5645 Sealing Machine
© Sealed Air Corporation (US)
MM-0110; Revision 1-A: 11/01/2013
2-5
Figure 2–3 Roller Locks
2. The proper height adjustment will be based on actual operating conditions. Irregular, jumping
motion of the fi lm delivery may indicate the need to adjust the delivery angle.
2.1.3
Conveyor Belt Adjustment
The conveyor belt tension is set at the factory, but may loosen over time. If the belt becomes
loose refer to Figure 2-4 as you use the belt tension adjustment procedure described here:
1. Loosen the Lock Nuts (1) and (2)
2. Turn the adjusting nut (3) clockwise to push the roller forward to increase the belt tension.
3. It is important to make the same adjustment on the other side of the conveyor.
Figure 2–4 Belt Tension Adjustment
(3)
(2)
(1)
