Sealed Air Fill-Air Rocket User Manual Download Page 53

Page: 53 / 68

Rev. C

© Sealed Air Corporation (US) 2014

Fill-Air Rocket™ Inflatable Packaging System User’s Guide

7.0 Troubleshooting

1. Material roll is empty.

2. Material roll is improperly loaded.

3. The bin full sensor has detected a

“full” bin.

Note: The bin may not appear full.

4. Electrical or mechanical failure.

• Load a new roll as required - see

5.1

Loading the Material Roll.

• Reload roll as required - see

5.1 Loading

the Material Roll.

• Remove the inflated bags from the bin

- automatic refill will restart.

• Note: The bin sensor is adjusted for each

packaging application. The “full” levels can

vary from a full bin to a half full bin. Refill

will begin once the bin is emptied to the

“low” level - see

5.5 Producing Air-Filled

Bags in Auto Replenish Mode.

• Contact your Sealed Air

representative.

7.3.1 The material will not

advance when the start button is

pressed - the control panel

Power LED is ON.

PROBLEM

POSSIBLE CAUSE

RECOMMENDED SOLUTION

7.3 Problems with Making Inflated Bags

Summary of Contents for Fill-Air Rocket





































































Search results

Summary of Contents for Fill-Air Rocket

Reviews:

Related manuals for Fill-Air Rocket

Brands by name

Popular brands

Sealed Air Fill-Air Rocket, User Manual

Search results

Summary of Contents for Fill-Air Rocket

Reviews:

Related manuals for Fill-Air Rocket

Brands by name

Popular brands