Sealed Air Fill-Air Rocket User Manual Download Page 47

Page: 47 / 68

Rev. C

© Sealed Air Corporation (US) 2014

Fill-Air Rocket™ Inflatable Packaging System User’s Guide

6.0 Maintenance and Repair

6.1 Preventative Maintenance

Warning!

Turn the main power switch to the OFF position, unplug the power cord, and follow

proper

Lockout/Tagout

procedures when instructed while performing maintenance and repair

procedures.

Warning!

Use protective eye wear when performing maintenance and repair procedures.

Preventative Maintenance Schedule

Table 6-1

Fill-Air Rocket

System

Maintenance Schedule

Activity

Procedure

Monthly

Clean

• Blow off all dust and debris from the system. Avoid inhalation

of dust and debris.

Inspect

• Check for any unusual wear on components.

• Check for any unusual wear or build-up on the side of the

seal assembly.

Yearly

Contact

Schedule an on-site inspection:

• Call your Sealed Air

representative to schedule an

inspection of the system.

Summary of Contents for Fill-Air Rocket





































































Search results

Summary of Contents for Fill-Air Rocket

Reviews:

Related manuals for Fill-Air Rocket

Brands by name

Popular brands

Sealed Air Fill-Air Rocket, User Manual

Search results

Summary of Contents for Fill-Air Rocket

Reviews:

Related manuals for Fill-Air Rocket

Brands by name

Popular brands