Rev. C
© Sealed Air Corporation (US) 2014
18
3.1 System Description
The Fill-Air
Rocket™
Inflatable Packaging System creates on-demand air-filled packaging from a
compact/uninflated pre-formed roll of bags. The inflated bag chain is perforated between bags and
can easily be separated by the operator as needed.
There are three (3) modes of producing air-filled bags:
•
Manual Mode
Press the
Start Key
to begin producing bags and the
Stop Key
to end production - see
5.4
Producing Air-Filled Bags.
•
Auto Replenish Mode
When a bin sensor or optional accessory is employed, the supply of inflated bags can be
continually/ automatically replenished - see
5.5 Producing Air-Filled Bags in Auto Replenish
Mode.
•
Batch Mode
Dispense a programmed length of bags - see
5.6 Producing Air-Filled Bags in Batch Mode.
3.2 Sequence of Operation
1. The operator presses the start key and the drive motor is activated, drawing the material from
the material roll and over the fixed material bar.
2. The material is drawn over the inflation nozzle where the two webs are separated and filled with air.
3. The material is drawn through the edge seal where a heat seal traps the air inside the bag.
4. The air-filled bags exit the system.
3.0 Overview
3.0 Overview
