Sealed Air Fill-Air Rocket User Manual Download Page 22

Page: 22 / 68

Rev. C

© Sealed Air Corporation (US) 2014

3.5 System Components

3.0 Overview

ON/OFF Power Switch

This circuit breaker switch located on the back of the system, controls power to the system.

Emergency Stop Switch (E-Stop)

This emergency stop switch stops all feeding, inflating, and sealing functions.

Main Power Cord

Plug this cord into a properly rated receptacle - see

3.3 Electrical Power Requirements

Control Panel

This panel with LCD display and keys is used to operate, program, and diagnose the system -

see

5.3 Control Panel

Power Cabinet

This cabinet houses the system’s mechanical and electrical components.

Warning! Do Not Open

- This cabinet should not be opened except by

qualified service

personnel

or a Sealed Air

representative.

Material Mandrel

This mount provides an unwind position for the material roll.

Inflation Nozzle

The open side of the material is pulled around this nozzle to inflate the bag.

Summary of Contents for Fill-Air Rocket





































































Search results

Summary of Contents for Fill-Air Rocket

Reviews:

Related manuals for Fill-Air Rocket

Brands by name

Popular brands

Sealed Air Fill-Air Rocket, User Manual

Search results

Summary of Contents for Fill-Air Rocket

Reviews:

Related manuals for Fill-Air Rocket

Brands by name

Popular brands