Sealed Air Fill-Air Rocket User Manual Download Page 38

Page: 38 / 68

Rev. C

© Sealed Air Corporation (US) 2014

Power ON LED

This green light indicates that the system is ON.

LCD Display

This information display is used to operate, program, and diagnose the system.

Up/Down Keys

When air-filled bags are being produced, these buttons allow the operator to adjust

the air-fill amount. They are also used in

Batch Mode

to set the batch length.

Start Key

This green key when pushed, starts air-filled bag production.

Start LED

This green light indicates that inflated bag production is selected.

Note:

Auto Replenish Mode

when the bin is full and production is paused, this light will

blink.

Stop / Reset Key

This red key when pushed, stops air-filled bag production or resets the system

once a fault is cleared.

Fault Warning LED

This amber light indicates a system fault that requires attention.

Hot Key 1

Hot Key 2

5.0 Operation

5.3 Control Panel

Summary of Contents for Fill-Air Rocket





































































Search results

Summary of Contents for Fill-Air Rocket

Reviews:

Related manuals for Fill-Air Rocket

Brands by name

Popular brands

Sealed Air Fill-Air Rocket, User Manual

Search results

Summary of Contents for Fill-Air Rocket

Reviews:

Related manuals for Fill-Air Rocket

Brands by name

Popular brands