Seakeeper 5500 GYRO, Installation Manual

Page: 65 / 66

INSTALLATION
MANUAL
Product: Document #: Rev: Page:
MODEL 5500 GYRO 90214 2 3 of 4
Section 5: INSTALLATION CHECKLIST AND SUPPLIES
5.1 Required Supplies needed for Gyro Installation (not supplied with gyro)
Item Description Qty
Installation
Manual
Reference
Section
Other
Reference System
1 Adhesive and cleaning supplies for bonding to hull 1 Mechanical
2 Safety Enclosure (possibly including soundproofing) 1 Mechanical
3 Spreader bar & leveling line for lifting gyro 1 Mechanical
4
Hose clamps for seawater plumbing to 3/4" (19 mm) hose
barb (2 per hose barb) 4 3 Cooling
5 Mounting screws for Serial Comms 6 ‐ Way Junction Box 2 2.1.3 Dwg 90010 Electrical
6 M6 terminal lug for grounding gyro at rear brace 1 2.3.4 Electrical
7
Cable, 4AWG, for grounding gyro at rear brace to vessel
ground (used with item 8) AR 2.3.4 Dwg 90149 Electrical
8
Cable, 2x12AWG, 24 VDC power input to Control Box, (Cable 1
to J10) AR 2.2.5 Dwg 90149 Electrical
9 Ferrules AR 2.6 WI 20 Electrical
10 Weidmüller crimp tool PZ 4 (or equivalent). 1 2.6 WI 20 Electrical
11 Sea water pump 1 2.2.3 Electrical
12
Relay for sea water pump control (Not required if using
230V AC pump) 1 2.2.3 Electrical
AR = As Required WI = Work Instruction
Dwg = Drawing SB = Service Bulletin