Seagate STT20000N, Product Manual

Page: 25 / 70

Installation Chapter 3
STT20000N Product Manual Page 17
Installation
Introduction
This chapter tells you how to install the STT20000 SCSI minicartridge drive. The
following paragraphs briefly outline the organization of this chapter.
•
The following section, Before You Begin contains general information that you
should read before you begin the installation.
•
Installing the Internal Drive lists guidelines for handling the internal drive,
describes the cabling and connectors, explains how to configure the drive, and
provides directions for mounting the drive unit.
Handling guidelines
Because the drive unit can be damaged by electrostatic discharge, an electrostatic
grounding strap is recommended. This strap prevents an electrostatic discharge
from damaging the electronic components on the board or in the drive unit
If you do not have an electrostatic grounding strap, perform the installation at a
static-safe workstation. If one is not available, follow these guidelines as you install
the interface card and drive unit:
•
Work in an uncarpeted area.
•
To protect the drive and interface card from static electricity, DO NOT remove
either the drive or the card from its anti-static bag until you are ready to install it.
•
Before you remove the drive or card from the anti-static bag, touch a metal or
grounded surface to discharge any static electricity buildup from your body.
Caution: If you touch static-sensitive parts of the drive (such as the printed circuit
board) elecronic components may be damaged.
•
Hold the drive by its edges only and avoid direct contact with any printed circuit
board exposed.
•
Lay the drive only on top of the anti-static bag or return it to its bag when you
need to lay the drive down.
Installation overview
The drive mounts internal to the computer in either a 3.5-inch by one-inch space or
in a 5.25-inch half-high space with the use of mounting brackets.
3