Internal SCSI Minicartridge Drive
Page 4
Installation Manual
Single-Ended SCSI Connector
The internal drive provides a 50-pin, right-angle, dual-row
connector on the main PCB at the rear of the unit.
Configuring the Drive
The drive mounts internal to the computer in either a 3.5-
inch by one-inch space or in a 5.25-inch half-high space
with the use of mounting rails and a surrounding bezel.
Three simple steps make up the installation procedure:
1.
Configure jumpers.
2.
Mount the drive unit.
3.
Complete the power and interface connections.
The installation procedure is the same for both models
except physically mounting the unit in the computer.
After you configure the jumpers and decide whether or not
you need to add terminators, follow the steps provided for
the size of enclosure into which you are mounting the
drive.
