Installation
Chapter 3
Product Description Manual
Page 15
4.
Install the drive unit in your PC.
5.
Install the software included in the package.
Installing the Seagate IDE Adapter card
The following steps guide you through installing the Seagate IDE Adapter card.
Caution: Turn off your computer and all peripherals before you begin the
installation. Unplug the computer power cord from the AC outlet.
Failure to do so might result in damage to your equipment or
electrical shock to you.
Note:
Because computer models vary between manufacturers, refer to your
computer manual for specific instructions about installing additional
boards.
1.
Remove the cover from your computer. Refer to the manual that you
received with your computer for instructions about removing the computer
cover.
2.
Choose an available 16-bit ISA expansion slot within your computer and
remove the slot cover. See Figure 3-1.
Figure 3-1
Removing the Expansion Slot Cover
3.
In the default setting, jumpers are installed at JP1 for IRQ15, at JP2, at
JP3, and at JP4. Other jumpers should NOT be installed on the card.
Summary of Contents for 10002475-003
