SD-MA-029
24
3
、
Set up UART
Users can set up the serial port parameters in this section
3.1
Serial
These are the serial port parameters and command lines for controlling this unit. Customers
can customise the settings, but not recommended.
3.2
Video Folder
If users want to use 3
rd
party controller to control videos of which folder to be played, video
folder parameter needs to be setup.
•
The folders name here needs to be identical to the video folder name in
‘
Video Source Setting
’ (see chapter 5.1)
3.3
Layout
If users want to use 3
rd
party controller to change the preset layouts , layout parameter
needs to be setup.
•
The layout name here needs to be identical to the preset layout name in
‘DS2 Onboard Layout List (see chapter
‘III UI
-No.4)
3.3
Projector
Users can set up command lines here to control projectors, screens and other devices which
devices which support remote power on/off via RS232.