SD-MA-029
8
2)
To adjust the edge blending overlap width if needed, the default is 240 pixels,
a.
Rules of thumb, the physical
projectors’
projection
overlap
width on the wall needs to be
bigger than edge blending width.
b.
if smaller edge blending zone is
needed, double click on double
clicking the projector box (see
image above) to open the Edge
Blending Width Adjustment dialog
box
c.
Users can always come back to change the width of edge blending overlap
3)
C
hoose how many channels here for the edge blending and then press ‘Next’ to go
to ‘Geometry Correction’ Step
a.
Users are able to define the colour of backgound and grid here
b.
‘Go to Gamma Correction’ here is the option for uers to jump to the gamma
correction without doing geometry correction.
