SD-MA-029
10
Step 1:
Adjust 1
st
Channel
Move the 4 edge lines of first channel (two adjustment points for each line at 1920 x 1080 grid
size) to match the 4 edges line of projection screen.
Zoom out the grids to make sure all the lines and straight, otherwise move the lines or
adjusting points to ensure the lines
are straight and each grid’s width/length are at the same
size on projection screen.
Grids on software
Corresponding grids on projection screen
If the projection screen is flat, all the lines and grids should not need large adjustment. if the
surface is curve and uneven surface, users need to adjust each line to make sure the lines are
straight, grid sizes are same. See the unadjusted projection on the curve screen below at left
and adjusted projection on right.
Once it is done,
press ‘Next Channel’ to be ready for adjustment of next channel.
