SD-MA-029
13
The
brightness always starts from ‘256’ and finishes at ‘0’. Users can use mouse scroll
wheel or hotkeys to change the amount of adjustment points.
Tip:
O
nly the ‘right’ of channel1 and ‘left’ of channel 2 need the gamma correction
with
this curve adjustment. The adjustment points for top, bottom and the other lines all need
to be set up at 256 otherwise users will see the black stripe on display wall.
2.
Luminance Coefficient
If the two projectors have brightness difference, DS can change the whole projector
output brightness by using different Luminance Coefficient.
Once the gamma correction is done, press the ‘cancel’ to save and exist the edge blending
set up. Now the edge blending processing is done (see below the projection screen of 1x2
edge blending with two projectors)
