______________________________________________________
WTS32 Wireless Thermostat
950-0160revB February 2, 2012
26
Configuration Menu
The configuration menu allows you to set certain thermostat operating characteristics to your system or personal requirements.
To enter the configuration mode:
-
Press mode button until the “OFF” is displayed in the SYSTEM box.
-
Press the “PROG” and “PROG DAY” buttons simultaneously to begin selections. The display will show the first item in the
configuration menu.
- Press the
▲ or ▼ buttons to select options.
-
Press “PROG” to move to next selection.
-
Press “HOLD/RUN” button to save selections and exit or wait 15 seconds for normal display to appear.
INSTALLER/CONFIGURATION MENU
Step
Press
Button
Displayed
(Factory Default)
Selection
▲ or ▼ button
Comments
1
PROG
,
,
,
Selects Single stage, Dual stage, or Heat Pump single stage,
Heat Pump 2-stage system configuration
2
PROG
(
)
,
Select GAS (
) / ELECTRIC (
)
3
PROG
(
)
,
Recovery function OFF or ON
4
PROG
( )
, ,
Stage 1, differential selection in degrees
5
PROG
( )
, ,
Stage 2, differential selection in degrees
6
PROG
( )
, ,
Stage 3, differential selection in degrees (Heat Pump only
–
W2 terminal)
7
PROG
(
)
,
Back Light (on/off)
8
PROG
,
Selects temperature display ° F or °C