______________________________________________________
WTS32 Wireless Thermostat
950-0160revB February 2, 2012
29
Step 6) Factory default is
“ ”.
SPAN3 - Selects temperature, Stage3 activates from Stage2. (SPAN may also be understood as differential.)
Step 7) Factory default is
“
”.
Select Backlight function OFF or ON.
Step 8) Factory default is
“ ”.
Select °F or °C Readout. When you change this parameter the thermostat will reset to its default settings and you will have to re-
program it. Changes the display readout to Centigrade or Fahrenheit.
Step 9) Factory default is
“ ”.
Selects time format display 12 or 24hours.
Step 10) Factory default is
“
”.
Select compressor delay COMP ON or OFF. Selecting COMP ON will cause the thermostat to wait 4 minutes before turning the
compressor back on after system loses power. It will also wait 4 minutes between cooling and heating cycles. This is intended to
protect the compressor from short cycling. Some newer systems have a time delay built in and do not require this feature. When
the thermostat compressor time delay occurs, “Wait” icon will illuminate until compressor delay has timed out.
Step 11) Factory default is
“
”.
STAGES,
– All stages remain on until setpoint is reached (COmfort setting).
– Each stage will turn off individually as temperature increases in Heat setting or decreases in Cool setting (EConomy
setting).
