OWNER
’
S MANUAL
(
SEA ISUZU FSR/FSD EV)
SEA-OWS-QA-004/5
ISSUE DATE:
30/05/2020
Page
19
of
56
Type1
–
Version2
(Two LED Status Lights)
The SEA-Drive® Electric Vehicle On-Board Charging socket has two LED status lights that illuminate
when the vehicle is plugged in to charge.
The two LED’s show different functions of the vehicle:
Left LED:
White LED, indicates if the charger is locked in place (Illuminated White when locked).
NOTE: The charger will not activate until the charge inlet is locked. If the charger does not lock
properly, check the position and status of the in-cord charger.
Right LED:
Multicolour LED, shows the state of the charger.
See the following descriptions of the right LED for correct operation:
Right LED Colour
Description
SOLID Red
Cable is connected but no mains power supply detected.
Check Mains Power Supply availability and circuits.
FLASHING Green
Cable is connected.
SEA-Drive® vehicle is charging.
SOLID Green
Cable is connected.
Batteries are fully charged.
Note:
1.
Once full charge is reached, the SEA-Drive® system automatically shuts
down to stop any residual load on the battery systems.
2.
Green LED is extinguished.
3.
SEA-Drive® system periodically checks that battery system charge remains
at 100%. If remaining charge is detected as less than 100%, charging system
restarts to charge SEA-Drive® batteries to 100%.
Unlit
(When plugging in)
Cable is not properly connected.
Check Cable connector is fully engaged in socket.
Charge Cable is not turned on that the wall.
Unlit
(After Charge Complete)
Vehicle will deactivate the LED’s some time after charge has bee
n
completed. This is to prevent any power drain of the low voltage batteries.
