OWNER
’
S MANUAL
(
SEA ISUZU FSR/FSD EV)
SEA-OWS-QA-004/5
ISSUE DATE:
30/05/2020
Page
43
of
56
Issue Date
Aug 2019
12
Once the charging cycle has
been completed and the battery
is fully charged (100%), the LED
at the vehicle side socket will
turn solid GREEN.
Once full charge is reached,
the SEA Drive system
automatically shuts down
to stop any residual load
on the battery systems.
SEA-Drive® Charging Procedure
SOP NO.
SOP-SD-001
Rev
1
Page
2 / 4
Model
SEA-Drive®
Variation
AS/NZ Trucks
The vehicle side socket will
light up RED for 3-5
seconds before it turns
YELLOW to indicate
charging has commenced.
11
Confirm that the LED found at
the vehicle side socket lights up
YELLOW. This shows that the
charging process in now
underway.
LED colour may be yellow
or light green.
C
h
ar
gi
n
g
P
ro
ce
ss
7
10
Remove the cap and plug the
charging connector (Vehicle-side
socket) to the charging inlet.
This will lock automatically.
Phase
Step
Safe Operating Procedure
Note
Photo
Instruction
Turn the wall plug ON.
8
Once powered ON, check that
the juice booster charger is
operational by confirming the
Green LED is solid below the 32
ampere indicator.
9
Open the charging inlet flap on
the component box.
Located at the component box
found on the side of the vehicle.
On opening the vehicle
charging cap, look for dirt,
debris and foreign objects.
Clean before connection if
needed.
NOTE: Charger on the truck
component box is never
live, just for power input
and will not output power.
