OWNER
’
S MANUAL
(
SEA ISUZU FSR/FSD EV)
SEA-OWS-QA-004/5
ISSUE DATE:
30/05/2020
Page
48
of
56
Page
3 / 4
Pack and store the EVSE safely
in order to reduce the risk of
damage. It is recommended to
store in a dry place.
Apr 2020
Phase
Step
Safe Operating Procedure
16
Turn the power OFF at
the 3-phase power supply.
Note
Photo
Instruction
SEA-Drive® Charging Procedure (Two-LED Function)
SOP NO.
SOP-SD-006
Rev
0
Model
SEA-Drive®
Variation
AS/NZ Trucks
Issue Date
17
Unscrew and remove the
charging connector from
the 3-phase power supply.
C
h
ar
ge
r
u
n
p
lu
gg
in
g
14
When fully charged, the socket
at the vehicle side will
automatically release.
If the charging process
needs to be interrupted
prior to the battery
reaching 100% full state,
simply turn the ignition
key to the ON position and
the socket will be released
automatically.
15
Remove the charging cable from
the socket at vehicle side.
IMPORTANT:
The vehicle cannot be
started while charging.
It means the vehicle
physically unable to move
until the EVSE is
completely removed.
C
au
ti
o
n
In the event of a charging fault
and to release the vehicle plug
from the vehicle inlet, open the
component box and turn the
vehicle socket pin to the unlock
position. This will then allow
you to release the plug from the
vehicle.
WARNING:
Ensure that the wall
charger switch is OFF.
Failure to do so may result
in death or serious injury.
Store in the original bag
within the cab or a sealed
container.
18
Lock
Unlock
