Sea Tel 6009-33, Installation And Operation Manual

Page: 43 / 95

Maintenance and Troubleshooting 6009-33 Broadband At Sea
7-7
7.2.6. Replacing the Rubber Bumpers
Use Sea Tel replacement kit 129978
11. Using a 6mm wrench, loosen and
remove all four of the rubber bumper
assemblies.
12. Apply Loctite to the exposed threads of
the four replacement rubber bumper
assemblies.
13. Install and tighten the four replacement
rubber bumper assemblies to torque
spec.
7.2.7. Replacing the Flow Control Valves
Use Sea Tel replacement kit 129976
1. Using a ___mm wrench, remove the
flow control valves installed in the side
of the pneumatic dampener.
2. Using the pipe thread sealant tape
provided in the kit apply 2 or 3 wraps of
tape around the “meter” end of each of
the replacement flow control valves..
PRELIMINARY