Sea Tel 6009-33, Installation And Operation Manual

Page: 24 / 95

6009-33 Broadband At Sea Set-up & Configuration
4-6
4.8. Default Setup Parameters
The following table shows the factory default parameters for the DAC-2202 Antenna Control Unit interfaced to a
Series 09 Antenna PCU. When the installation & setup of your system is finished you can record the “optimized”
settings for your system in the “My Parameters” column. Also refer to the Antenna Control Unit Manual for more in-
depth information each of the individual parameters and how to enter, or change, the parameters.
PARAMETER Ku DishScan My Parameters
EL TRIM 0
AZ TRIM 0
AUTO THRES 100
EL STEP SIZE 0
AZ STEP SIZE 0
STEP INTEGRAL 0
SEARCH INC 10
SEARCH LIMIT 100
SEARCH DELAY 30
SWEEP INC 0000
SYSTEM TYPE 7 *
GYRO TYPE 2 (NMEA/SBS)
POL TYPE 72
POL OFFSET 40
POL SCALE 90
AZ LIMIT 1 0
AZ LIMIT 2 0
EL LIMIT 12 0
AZ LIMIT 3 0
AZ LIMIT 4 0
EL LIMIT 34 0
AZ LIMIT 5 0
AZ LIMIT 6 0
EL LIMIT 56 0
5v OFFSET 0
5V SCALE 0
TX POLARITY 2 (Horizontal TX)
TRACK DISP 130
* Modem Lock input & Modem TX Mute output functions ARE set for the i-Direct
Passport II, 3100 or 5100 Series modems, refer to SYSTEM TYPE parameter
information.
PRELIMINARY