Sea Pro 248, Owner'S Manual

Page: 20 / 50

20 248 BAY SERIES
There is a secondary Trim Control located at the Bow, in
the panel provided for the plug in of a trolling motor.
This rocker switch will allow
the operator to adjust the Trim
of the motor while operating
the vessel during trolling, and
during fishing activities.
Steering Controls:
Your SEA PRO boat has
been equipped with a
Stainless Steel Steering
Wheel and Hydraulic
Steering System. The helm
unit includes a reservoir
and pump that pumps
hydraulic fluid to the
steering cylinder located
on the motor bracket
causing the motor to turn.
5 - Position Tilt:
The Steering System also
includes a Tilt Wheel
Feature, which allows the
operator to position the
steering wheel in five positions for comfort. Activate
the tilt lock lever below the steering wheel to adjust the
position. Releasing of the lock lever will lock the
steering wheel into the desired angle and position.
Easy Access Reservoir:
There is a reservoir fill cap
located on the helm for adding
hydraulic fluid and for service.
If your SEA PRO boat has been equipped with a steering
system other than hydraulic, please refer to the Engine
Owner
’ s Manual for Operation, Maintenance and
Specifications.
SYSTEMS & COMPONENTS