82
1. PTO side spark plug cable
Start engine as explained above. If en-
gine continues to flood, see an autho-
rized SEA-DOO dealer.
Out of Fuel
DI Models
When running the engine out of fuel,
it may be necessary to remove and in-
stall the safety lanyard 2 - 3 times to
initially feed the fuel system after fuel
tank refill.
Towing the
Watercraft
in
Water
All Models
Special precautions should be taken
when towing a SEA-DOO watercraft in
water.
Maximum recommended towing speed
is 24 km/h (15 MPH).
When towing your watercraft in water,
pinch the water supply hose from the
impeller housing to the engine with a
large hose pincher (P/N 529 032 500).
This will prevent the cooling system
from filling which may lead to water be-
ing injected into and filling the exhaust
system. Without the engine running
there isn’t any exhaust pressure to car-
ry the water out the exhaust outlet.
CAUTION:
Failure to do this may re-
sult in damage to the engine. If you
must tow a stranded
watercraft
in
water and do not have a hose pinch-
er, be sure to stay well below the
maximum towing speed of 24 km/h
(15 MPH).
Snugly install the hose pincher on the
water supply hose as shown.
GS AND GTI MODELS
1. Hose pincher
1
F16H01Y
F01B23Y
F02E04Y
1
smo2002-002a.book Page 82 Monday, July 30, 2001 2:18 PM
www.SeaDooManuals.net
Summary of Contents for GS 2002
Page 1: ...www SeaDooManuals net ...
Page 132: ...www SeaDooManuals net ...
