Sea-doo GS 2002, Operator'S Manual, Page: 42 / 132

40
All Models
5) Variable Trim System
(VTS) Button
(if so equipped)
Located just below engine start/stop
button, this button is used to change
pump jet nozzle position and to adjust
ride to suit watercraft load and water
conditions.
1. VTS button
Models with a VTS Gauge
1. Bow up
2. Bow down
The VTS gauge shows the riding angle
of the watercraft.
Models with a VTS Position
Indicator
A VTS position indicator is included in
the information center gauge. See else-
where in this section.
6) Variable Trim System
(VTS) Gauge
(if so equipped)
It is located in dashboard. See above
for operation description.
7) Choke Lever
Carburetor-Equipped Models
The choke is provided to supply a rich-
er fuel/air mixture when starting a cold
engine.
Choke lever should be pulled and held to
operate. Lever will automatically return
to its normal position when released.
1. Choke lever
8) Shift Lever
(if so equipped)
A push-pull lever:
– forward
– neutral
– reverse.
F01L62Y
1
F08L1PY
1
2
WARNING
Shift lever should only be used
when the engine is idling and craft
is completely stopped. Do not use
as a grab handle.
1
F17L0GY
smo2002-002a.book Page 40 Monday, July 30, 2001 2:18 PM
www.SeaDooManuals.net