42
11) Tachometer
(if so equipped)
An analog tachometer indicates the
revolutions per minute (RPM) of the
engine. Multiply by 1000 to obtain the
actual revolutions.
12) Information Center
Gauge/Buttons
(if so equipped)
NOTE:
With the safety lanyard discon-
nected, information center can be ac-
tivated for approximately 33 seconds
by depressing the engine start/stop
button. This is convenient to see the
fuel level or view some other func-
tions when the safety lanyard is not at
hand.
This is a LCD multifunction gauge. Dif-
ferent displays and functions can be
activated using 2 buttons — MODE
and SET — following specific sequenc-
es as described below.
1. To change display mode
2. To set or reset a function
Resetting a Function
To reset a function (such as the chro-
nometer, distance, etc.) press and hold
the SET button for 2 seconds while in
the appropriate mode.
The information center includes the fol-
lowing display areas.
1. General display
2. Message/units display
3. Warning light
4. Fuel level display
5. VTS position indicator (
if so equipped
)
General Display
The default display is the clock (or
clock/compass
if so equipped
) unless
another mode has been selected. See
Display Priorities
below.
Repeatedly pressing the MODE button
scrolls the following displays: Tachom-
eter, speedometer, average speed, trip
meter, hourmeter, water temperature,
exterior temperature (
if so equipped
)
and chronometer.
1. Press to change display mode
When you are satisfied with your choice,
stop pressing the button.
F00L2BY
1
2
F00L2CY
3
4
5
1
2
F00L2BZ
1
smo2002-002a.book Page 42 Monday, July 30, 2001 2:18 PM
www.SeaDooManuals.net
Summary of Contents for GS 2002
Page 1: ...www SeaDooManuals net ...
Page 132: ...www SeaDooManuals net ...