65
GTX RFI MODELS
1. Reverse gate in downward position
OTHER MODELS
1. Shift lever in reverse position
OTHER MODELS
1. Reverse gate in downward position
NOTE:
To obtain maximum efficiency
and control from the reverse, increase
engine speed to slightly above idle.
Too much RPM will create water tur-
bulence and reduce reverse efficiency.
GTX RFI Models
In reverse position, turn the handlebar
in the opposite direction that you want
to move the rear of the watercraft.
For example, to steer the rear of the
watercraft to the left side, turn the han-
dlebar to the right side.
1. Handlebar turned to the right side
2. Rear of
watercraft
moving to the left side
GTI, GTX Series and RX Series
In reverse position, turn the handlebar
in the same direction that you want to
move the rear of the watercraft.
For example, to steer the rear of the wa-
tercraft to the left side, turn the handle-
bar to the left side.
All Models
Variable Trim System
(if so equipped)
The variable trim system (VTS) chang-
es the angle of the jet pump nozzle to
provide the operator with a fast, effec-
tive system to compensate for load,
thrust, riding position and water condi-
tions. Correctly adjusted, it can im-
prove handling, reduce porpoising, and
position the watercraft at its best riding
angle to attain maximum performance.
F07J0OY
1
F17L0CZ
1
1
F17J02Y
WARNING
Shift lever should only be used when
the engine is idling and watercraft is
completely stopped. Do not use re-
verse to stop the watercraft.
F07A0CY
1
2
smo2002-002a.book Page 65 Monday, July 30, 2001 2:18 PM
www.SeaDooManuals.net
Summary of Contents for GS 2002
Page 1: ...www SeaDooManuals net ...
Page 132: ...www SeaDooManuals net ...