Sea-doo FISH PRO SPORT 2022, Original Instructions Manual

Page: 63 / 228

61
M Mo od de e B Bu utttto on n
T TY YP PIIC CA AL L
It is used to choose between Normal,
Sport or Eco mode.
Refer to Operating Modes for details.
iin ntte elllliig ge en ntt D De eb brriiss F Frre ee e P Pu um mp p ((iiD DF F))
B Bu utttto on n
Located in the center of the left
controller.
It allows to activate the iDF system.
Refer to
How to Use the intelligent De-
bris Free Pump System in Operating
Instructions section.
E En ng giin ne e S ST TA AR RT T//S ST TO OP P B Bu utttto on n
The engine START/STOP button is lo-
cated on the LH handlebar.
E En ng giin ne e S Stta arrttiin ng g a an nd d S Stto op pp piin ng g
Refer to Operating Instructions for
complete procedures on how to start
and stop the engine.
W Wa akkiin ng g U Up p tth he e E Elle eccttrriicca all S Syysstte em m
Press the START/STOP button once
without installing the tether cord on
the engine cut-off switch.
This will power up the electrical sys-
tem; the information center will cycle
through a self-test function.
The electrical system will stay pow-
ered up for approximately 75 seconds
after the START/STOP button was
depressed.
When the tether cord is installed on
the engine cut-off switch, the system
will be powered for 60 minutes.
Every time the START/STOP button is
pressed,
the countdown restarts.
When the battery voltage drops below
12.3V, the LOW BATTERY indicator
lamp will light up and the electrical
system
will shut down after 75
seconds.
P Po osstt--D Drriivve e B Ba atttte erryy M Ma an na ag ge em me en ntt
This feature allows keeping the elec-
trical system awake to allow using ac-
cessories when the engine is turned
off. It also prevents draining the bat-
tery too much when using accesso-
ries.
When the battery voltage
reaches 12.3V or less, the system will
CONTROLS