34
CHALLENGER 1800
1. Speedometer
16) Wind Deflector
(if so equipped)
For your convenience, a movable de-
flector may be used to divert the air
flow. Pull latch then lift the deflector
until locked by the retaining device.
When finished, lower deflector then
push down to relatch.
TYPICAL
TYPICAL
17) Bilge Drain Plug
Should water be left in the bilge, it can
be easily drained by unscrewing the
plug while on the trailer.
Tilt the jet boat slightly to the rear so
that the water can completely flow out
of the bilge.
It is suggested to drain bilge when
trailer is on a ramp.
1. Drain plug
2. Loosen
3. Tighten
18) Grab Handles
Provides a handhold for the passen-
gers.
F04H3DZ
1
F10L0EY
F10L0FY
-
CAUTION
Remove jet boat from water prior
unscrewing the drain plug.
◆
WARNING
Always make sure bilge drain
plug is properly tightened prior
to launching boat.
-
CAUTION
Never use the grab handles to
pull anything or to lift the jet
boat.
F04L5RY
1
3
2
lmo9802a.fm5 Page 34 Monday, September 22, 1997 11:48 AM