82
Reverse Gates
When shift lever is in forward position,
reverse gates should be in an upward
position and locked there. With the
shift lever in neutral position, reverse
gates should be in intermediate posi-
tion. When shift lever is in reverse posi-
tion, reverse gates should be in down-
ward position. Refer to an authorized
dealer if an adjustment is necessary.
Fuses
Accessories, Engine Electrical
System and Gauge(s)
If a fuse is defective, replace by one of
the same rating.
If nothing at all is working, check main
fuses located close to battery in en-
gine compartment.
NOTE:
There are spare fuses in rub-
ber holders attached to the top of
MPEM.
TYPICAL
1. Battery
2. Main fuses
If an accessory, engine or gauge is not
working, check its fuse condition.
Fuses for the accessories, the electri-
cal system of the engine(s) and the
gauge(s) are mounted on the Multi-
Purpose Electronic Module (MPEM),
which is located in the engine com-
partment.
1. MPEM
2. Spare fuse holders
3. Top fuse block
4. Bottom fuse block
5. Locking tabs
◆
WARNING
Ensure the shifter/reverse gates
operates freely and are not stress-
ing the reverse cable.
-
CAUTION
Do not use a higher rated fuse as
this can cause severe damage. If
a fuse is regularly burnt, refer to
an authorized dealer.
F04H60Y
2
1
F04H65Y
2
1
5
4
3
lmo9802a.bk : lmo9802a.fm5 Page 82 Monday, September 8, 1997 9:16 AM