Sea-Bird Scientific SUNA V2, User Manual

Page: 21 / 54

5. Put a check in either the "Single Output File" box or the "Graph Results" box in the
Output Data Files area of the dashboard.
• If the user processes more than one file, the output can be directed to a single file
of output. Otherwise, each file that is input to process will have one file of output.
6. Push Process Selected File(s) .
• A graph of the processed data shows in the Reprocessed Nitrate Graph. The
upper area shows how the chemical species combine to show measured
absorbance. The lower area shows a timeline of the original and reprocessed
nitrate concentrations. Use the slider under the timeline to select one
measurement and see the concentration to the left.
5.3 Show data from multiple sensors
The software lets the user show data that has been saved on the PC from each
supported sensor. The user can select up to 12 parameters to look at.
1. Go to the Data menu, then Show Data from Sensor .
2. Go to the area of the first supported sensor and push Browse to go to the .csv file-
type.
3. Select the file, then push Open .
4. Push Select Sensors to Show .
5. Put a check in the box of each parameter to look at in the Time Series graph.
6. Push OK .
Transmit data
19