Sea & Sea YS-01, Instruction Manual

Page: 5 / 26

E-4
Safety Precautions
CAUTION

Do not fire the strobe or illuminate the light towards a driver of a vehicle to
avoid causing accidents.

Do not operate the product while driving a vehicle. Inattention could result in
accidents.

For use on land, do not operate the product at precarious foothold. It may
cause falling, injury or product damage.

Do not leave the product on a slope or an unstable surface. It may be broken
after falling or injure someone below it.

Keep out of reach of children to prevent accidental ingestion. If swallowed,
seek medical advice immediately.

Read the instruction manual and observe proper precautions before use of
this product.

This product has been designed and manufactured for use at a water depth
within 75m / 250ft. Please note that diving to a depth in excess of 75m / 250ft
may cause damage to the product or may lead to water leakage.

Should you notice somoke or an unusual smell coming from the product, turn
it off and remove the batteries immediately, taking care to avoid burns.
Continued operation could result in injury. After removing the battery, take the
product to a SEA&SEA authorized service center for inspection.

Discontinue use and turn the product off immediately should you notice flooding
or leakage.

When the product is flooding, interior pressure may build up. Please be
careful when opening the product as water may spurt out or the cap may
open explosively and cause injuries.

Do not open the battery cap in the vicinity of open flames.

The product has been constructed with an airtight seal. When packing the
product for airplane travel, do not seal-up the product to alleviate pressure
build up due to atmospheric changes.

Do not open the product in a wet or sandy environment. Protect the interior
from moisture and debris in order to prevent malfunction or flooding.

Keep away from strong magnetic fields. Do not use or store this product in
the vicinity of equipment that generates strong electro-magnetic radiation or
magnetic fields. Strong static charges or the magnetic fields could cause
malfunction, or affect the product's internal circuitry.

Before using the product in an airplane or a hospital, check if it is allowed.
Electromagnetic waves emitted by the product may interfere with the measuring
instruments or medical equipment.

Do not cover or wrap the product with a cloth. This could result in deformation
of the product or in fire.