E-14
6
Align the round mark and
①
on the battery cap with the
OPEN
●
position, insert the
battery cap into the strobe
7
Turn
①
clockwise to the LOCK
position
Installing the Batteries
CAUTION
Replace the batteries when it takes 30 seconds or more until the
Ready/TTL lamp illuminates in red after firing with FULL output.
When installing or removing batteries, thoroughly wipe water
off the strobe and dry your hands. Pay particular attention not
to allow water from your hair or wetsuit to drip into the battery
compartment. This is in order to prevent an electrical hazard,
mold, malfunction or flooding.
Never mix old and new batteries or batteries of different types.
Always replace all batteries with new batteries at the same time.
Turn until you hear the sound of it
clicking into place.
Fig.4
Fig.3
O
PE
N
LOCK
①
Round mark
①
O
PE
N
LOCK
