E-12
Identification of Parts
Ready / TTL lamp
Fixing Bolt
CAUTION
Ready
TTL
Illuminates in red when
the strobe is ready to fire.
Illuminates in green for
approx. 3 seconds after
firing with DS-TTL flash
output.
Do not tighten the fixing bolt up on the product unless it is being
attached to an arm.
Remove the fixing bolt from the product when storing.
Take care not to insert the fixing
bolt from the wrong side, as this
can result in damage to the arm
installation nut.
To mount the strobe to an arm, insert
the fixing bolt in the direction of the
arrow.
