E-15
Connecting the Strobe
CAUTION
1
3
Some housing are not compatible with fiber-optic cable.
When you use this strobe, connect the strobe to the camera
(housing) with a fiber-optic cable (optional). Using a built-in
slave sensor, this strobe is triggered by sensing the light from
a digital camera's built-in flash. If the fiber-optic cable is not
used, depending on the shooting conditions the strobe may
either not fire, or not obtain DS-TTL flash exposure compensation.
Insert the fiber-optic cable's
connector into the fiber-optic
cable socket (slave sensor) of
the strobe until it stops
Connect the fiber-optic cable's
connector to the socket in the
housing
2
Secure the fiber-optic cable
with the fiber-optic cable hook
When the housing is not equipped
with the socket, attach the optional
strobe mask (A) to the flash window
of the housing, and then connect
the fiber-optic cable (B).
When inserting the fiber-optic cable
into the socket for additional strobe,
the strobe will not fire correctly.
Please refer to page E-16 for
details.
A
B
Fiber-optic cable hook
