r3bEL mini User Manual
19
8.
To test the motors, use the circular control pad to move the X and Y motors. The 0.1,
1, 10, and 100 increments represent actual distances in millimeters.
X-Y-Z coordinate system on r3bEL mini
X-coordinate:
The X-motion moves the extruder head left or right.
+X
will move the extruder head to
the right relative to the user facing the front of the printer and
–
X
will move the
extruder head to the left.
Y-coordinate:
The Y-motion moves the bed (
Note:
The motion of the bed is relative to the extruder
head).
+Y
will move the bed to the front relative to the head so the extruder head will
shift toward the back of the bed and
-Y
will move the bed to the back relative to the
head, so the extruder head will shift toward the front of the bed.
Z-coordinate:
The Z-motion moves the bed up and down. Use the control bar on the right to move
the platform in the Z direction. It is important to note that
+Z will cause the platform
to move down
, increasing the distance between the extruder and the platform bed.
-Z
will move the platform up
, decreasing the distance between the extruder and the
platform bed.