SDMO ST 2.36H, User And Maintenance Instructions, Page: 15 / 54

Contents
1. Preface
2. General description
3. Preparation before starting
4. Using the generator set
5. Safety features (if fitted, see specifications table)
6. Maintenance schedule
7. Maintenance procedures
8. Storing the generating set
9. Troubleshooting
10. Specifications
11. Conditions of warranty
12. EC Declaration of conformity
1. Preface
1.1. Recommendations
Thank you for buying one of our pump units. We recommend that you read this manual carefully and follow the safety and
maintenance advice and user instructions for your pump unit very closely.
The information contained in this manual is taken from technical data available at the time of print. In line with our policy of
continually improving the quality of our products, this information may be amended without warning.
1.2. Pictograms and plates on the generating sets and what they mean
Danger Warning: risk of electric shock
Earth
Danger, risk of burns
Warning: oil is not supplied with
the pump unit. Always check the
oil level before starting the pump
unit.
1 2 3
1 - Important: refer to the documentation accompanying the pump unit
2 - Warning, emission of toxic exhaust gases. Do not use in a confined or poorly ventilated area.
3 - Stop the engine before filling with fuel
A = Pump unit model
B = Max fuel flow at zero
elevation
C = Suction and discharge
diameters
Example of an identification plate
D = Maximum elevation height
E = Weight of pump unit
K = Serial number
1.3. Instructions and safety regulations
Danger
Do not start the pump unit without first removing the protective cover and closing all of the openings.
Never remove the protective covers or open the access flaps if the pump unit is running.
A
E
F
C
B
D
RAMIRENT