manualshive.com logo in svg

SDM P550QVF07.0, User Manual, Page: 44 / 65

Share
Download
SDM P550QVF07.0 User Manual Download Page 44

44

  |  «

 

ON SCREEN DISPLAY (OSD) MENU » 

Item 

Description 

Power Saving 

Enables/Disables the power saving function so that the display will 
automatically power off after a pre-configured period of time when no signal 
is detected (30 / 60 / 120 / 240 / 300 Sec / Off). 

  NOTE: The display does not support the Power Saving function 

when playing media files from a USB flash drive. 

 

Monitor ID 

Sets a unique ID number for the display (1 to 99). 

RS232 Switch 

Selects the RS232 command control source (COM Port / Slot / Off). 

Tiling Mode 

Enables Tiling Mode for the display when assembling a video wall (Off / 2x1 / 
2x2 / 3x1 / 4x1 / 1x2 / 1x3 / 1x4) and sets its horizonal/vertical position 
within the video wall. 

 

NOTE:   

 

The maximum number of displays for a video wall is 4. 

 

The display does not support the Tiling Mode function when 
playing media files from a USB flash drive.   

 

Detect Signal & 
Slot Power 

Manages the power of the display and SDM module (Off / On / Slot Auto 
On-Off). The default setting (Off) will automatically shut down the SDM 
module when the display is powered off. When set to On, only the display 
backlight will be turned off when the display is powered off. When set to Slot 
Auto On-Off, the SDM module will be automatically turned on/off when the 
display is powered on/off. 

  NOTE: To prevent the SDM module from being damaged, it is 

suggested that you follow the standard power-off procedure to 
shut down the SDM module before the display is powered off. Or 
set Detect Signal & Slot Power to On so that the SDM module is 
always on. 

 

Anti-Burn-In 

Triggers the screen saver function (Off / On / Once).   

  NOTE: The screen saver function works by displaying a vertical 

white rectangle ¼  the width of the screen moving across the 
screen, followed by a vertical black rectangle. If On is selected, the 
process will repeat every 8 hours until it is disabled.     

 

EDID Switch 

Changes the EDID Switch setting (Auto / EDID 1.4 / EDID 2.0). If the signal 
source supports YCbCr: 4:4:4, the following settings are available:   

 

EDID 1.4: supports up to 3840x2160@30Hz YCbCr 4:4:4 

 

EDID 2.0: supports up to 3840x2160@60Hz YCbCr 4:4:4 

  NOTE: The HDMI IN2 port only supports 3840x2160@50/60Hz 

YCbCr 4:2:0. 

 

Summary of Contents for P550QVF07.0


































































Reviews:

No comments