73
NOTE!
z
For an NVR with multiple NICs, you can configure the NICs and
choose a default route. If you switch the working mode, the
enabled 802.1x and ARP protection will be disabled automatically.
z
If your NVR has a PoE port or a switching port, you can configure an
internal NIC IPv4 address.
z
To use IPv6, make sure the NVR and PC can connect to each other
using IPv6 addresses. To view live or recorded videos, make sure
the IPv4 addresses are also connectable.
PPPoE
The NVR allows access through Point-to-Point over Ethernet (PPPoE). If
you are using 3G/4G (see
3G/4G
for details), you need to disable it first.
1.
Click
System
>
Network
>
PPPoE
.
2.
Enable PPPoE by selecting the check box.
3.
Enter the username and password provided by your Internet
Service Provider (ISP). Network information including IP address
appears when dial-up
succeeds.
NOTE!
If your NVR has multiple NICs, PPPoE dial-up will be implemented
through the NIC specified as the default route.
4.
Click
Apply
to save the settings.
EZCloud
The NVR allows access through the EZCloud website or from the EZView
mobile surveillance app. You need to sign up for an account first before
using this function.
1.
Click
System
>
Network
>
EZCloud
.
