SCUBAPRO-UWATEC galileo luna, Manual

Page: 63 / 76

3. Diving with Galileo
61
3. Diving with Galileo
English
reappear again, starting at 2 minutes, the
next time you ascend to the PDIS depth;
- you have ascended by more than
3m/10ft above the PDIS. The PDIS
label and value in the MORE sequence
are replaced by the label PDIS NO
to indicate the fact that you have not
performed the PDI stop.
F
NOTE:
Galileo issues no warnings relating to
a missed PDI stop.
3.6.2 PDIS during DECOMPRESSION
diving
In CLASSIC and FULL screen
configurations, upon entering
decompression the PDIS information is
moved to the lower left corner and becomes
part of the
MORE sequence. This prevents
the potential misinterpretation between
the PDI stop and the decompression
stop. Additionally, in order to avoid
conflicts between the PDIS range and a
decompression stop, the PDIS depth is
displayed only if it is 3m/10ft deeper than
the deepest decompression stop.
As soon as you reach that depth during
an ascent, the 2-minute countdown is
initiated. The timer now appears to the very
right of the PDIS label.
Descending by more than 0.5m/2ft below
the PDIS or ascending by more than
3m/10ft above the PDIS follows the same
rules as described in the
NO-STOP case.