SCUBAPRO-UWATEC galileo luna, Manual

Page: 57 / 76

3. Diving with Galileo
55
3. Diving with Galileo
English
In compass mode, the safety stop timer
works the same way as in the
CLASSIC ,
LIGHT and FULL configurations. If the
safety stop timer is active while switching
from one configuration to the other, the
timer information itself will transition
smoothly between displays.
3.4.4 Viewing dive profile, individual
compartment saturation and
pictures
You can view your dive profile by pressing
and holding the middle button (marked
“ MORE ”). The screen will show a graphic
representation of your dive profile together
with a line representing either your possible
direct ascent (if in no-stop mode) or your
decompression profile (if in decompression
mode). The dive profile will remain on your
screen for a maximum of 12 seconds and
then the dive computer information will
appear again. You can revert to the dive
computer screen at any time by
pressing
and holding the right button.
Pressing “ MORE ” while the dive profile
is displayed brings up a graphical
representation of the relative saturation for
each of the eight compartments modeled
by the ZH-L8 ADT MB algorithm. The
height of each bar indicates the ratio of
the current tissue loading with respect to
the maximum tolerable loading, expressed
in percentage. The color denotes whether
the compartment is on-gassing or off-
gassing: grey denotes compartments
that are off-gassing, while black denotes
compartments that are on-gassing. This
representation, aside for the colors, is
analogous to that given by the SmartTRAK
software described in section 4.3. This
graphical representation will remain on your
screen for a maximum of 12 seconds and
then the dive computer information will
appear again. You can revert to the dive
computer screen at any time by
pressing
and holding the right button.